Making a Stainless Race Buggy » 40 The plates are then clamped, tacked and stitch welded to the tubes.

40 The plates are then clamped, tacked and stitch welded to the tubes.

39 The tube is drilled with a 9mm hole for plug welding, the ends are also welded for extra strength.
41 To make a swan neck correctly, you need some sort of layout, to get the geometry correct. In this case seeing as I cannot use a CAD program I have drawn a full scale lay out on a piece of hardboard

This entry was posted on Friday, December 16th, 2011 at 8:05 pm. It is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.