Making a Stainless Race Buggy » 56 The tube is drilled with a 9mm hole ready for plug welding.

56 The tube is drilled with a 9mm hole ready for plug welding.

55 The headstock is made from a piece of 48mm tube and a stainless boss to hold the 12mm bearings.
57 The hole is plugged and the ends are stitch welded for added strength.

This entry was posted on Friday, December 16th, 2011 at 8:05 pm. It is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.