Making a Stainless Race Buggy » 35 Round discs are made to cap the end of the tube, then all tacked together

35 Round discs are made to cap the end of the tube, then all tacked together

34 Footpegs are 27mm tube 200mm long cut at 22.5 degrees and another piece 90mm long cut the same to end up with a 45 dregree angle when welded together. The plates are 60mm wide and 3mm
36 Once the plates have been bent, now is a good time to check the lengths are correct

This entry was posted on Friday, December 16th, 2011 at 8:05 pm. It is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.