Making a Stainless Race Buggy » 11 Give the axle plates a quick buffing prior to fixing to the axle, it will be polished again once the welding is complete.

11 Give the axle plates a quick buffing prior to fixing to the axle, it will be polished again once the welding is complete.

10 I always centre dot the axle, to use as a reference point
12 After marking from the centre dot (in this case 230mm either side of the centre dot)the two positions of the axle plates, tack the first plate on, either end and both sides.

This entry was posted on Friday, December 16th, 2011 at 8:04 pm. It is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.