Making a Stainless Race Buggy » 16 The plates have been welded on, they can then be cleaned, using the buffing discs. You only have have to tack the tube and it will bend it, after fully welding the axle looks like a banana.

16 The plates have been welded on, they can then be cleaned, using the buffing discs. You only have have to tack the tube and it will bend it, after fully welding the axle looks like a banana, this then has to go into the hydraulic bender to be staightened, The plates are 6mm thick and 200mm long.

15 Once, both plates have been clamped and tacked on, they can then be fully welded.
17 Most important part of making any forks is a jig, and this is the one I am using in this process

This entry was posted on Friday, December 16th, 2011 at 8:04 pm. It is filed under . You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

Comments are closed.